硬X射线磁圆二色实验方法的建立

在北京同步辐射装置(BSRF)1W1B光束线和XAFS实验站上国内首次建立了硬X射线波段的磁圆二色实验(XMCD)方法. 以单晶金刚石作为相位延迟片, 在透射劳埃(Laue)模式下, 利用衍射双折射效应, 将入射的单色线偏振光转变为相应的左旋和右旋圆偏振光, 测量磁化样品对左旋和右旋圆偏振光吸收的差异, 获得了XMCD信号. 本实验使用透射方法测量了Pt-Fe合金Pt L_2,3边的XMCD, 获得了XMCD信号. XMCD实验方法的建立, 为研究磁性材料尤其是磁性薄膜材料的电子结构和磁结构提供了实验基础.     

锐钛矿二氧化钛超细纳米晶的三声子互作用

本文通过对粒径为2.2-25.5nm的锐钛矿二氧化钛超细纳米晶在83-293 K温度范围内的变温拉曼光谱的研究,得到了三声子互作用对拉曼频率和线宽的贡献随粒径的变化关系。结果表明锐钛矿二氧化钛超细纳米晶的三声子相互作用随粒径减小而加强。     

校正空间分块镜复位误差所需的最少自由度的确定

可收展式分块镜共相位成像技术是实现光学系统超大口径、超高分辨率成像的关键技术。分块镜复位误差会引起各子镜之间的共相位误差和整个拼接镜面的面形误差。合理确定校正分块镜复位误差所需的自由度具有非常重要的意义。计算机仿真分析了分块镜的复位误差对拼接镜面面形误差的影响。结果表明,所需的校正自由度的个数不仅与展开机构的复位精度有关,而且与分块镜镜面的几何参数有关。     

稀土、2,2''''-联吡啶、邻氨基苯基苯甲酸配合物合成、光谱表征及荧光性质

2,2'-联吡啶(bipy)、邻氨基苯基苯甲酸(HL)与稀土离子(RE=Tb,Eu,Sm,Nd)合成了固体稀土配合物.用元素分析、摩尔电导、紫外光谱、红外光谱、差热-热重分析和荧光光谱,对配合物的组成进行了确定和表征,并对TbL3和TbL3·bipy·3H2O的荧光性能进行了测试和讨论.TbL3·bipy·3H2O的荧光强度比TbL3的荧光强度强.     

激光二极管反馈干涉的实验观测

利用LabView软件虚拟示波器和信号源,观测了激光二极管反馈干涉实验现象．实验证明反馈回激光二极管的光的入射方向和入射光强以及信号处理电路的带宽,对反馈干涉信号有很大的影响．     

Darboux Transformation for Tzitzeica Equation

We present a Darboux transformation for Tzitzeica equation associated with 3 × 3 matrix spectral problem. The explicit solution of Tzitzeica equation is obtained.     

与HBV X蛋白相互作用的细胞蛋白的筛选及其鉴定

参考GenBank核苷酸序列库中的HBV的核苷酸序列设计合成了一对对应于HBx基因的引物，从原发性肝癌(hepatocellular carcinoma，HCC)患者的血清中提取HBV基因组DNA作为模板，扩增HBx编码区并测定了核苷酸序列．将该编码区克隆到酵母双杂交系统的诱饵蛋白表达载体pGBKT7中，转入酵母细胞AH109，进行表型鉴定．然后通过Mating实验从已制备好用于酵母双杂交系统的肝cDNA表达文库中筛选与HBx相互作用的细胞蛋白，并用体外免疫共沉淀实验进一步验证．研究表明，分离得到的与HBx基因编码的蛋白相互作用的4种新的细胞蛋白，分别是醛缩酶B、C8α亚基、一种丝氨酸蛋白酶Hepsin和一种未知蛋白．     

BOUNDEDNESS OF MAXIMAL SINGULAR INTEGRALS

The authors study the singular integrals under the Hormander condition and the measure not satisfying the doubling condition. At first, if the corresponding singular integral is bounded from L2 to itself, it is proved that the maximal singular integral is bounded from L∞to RBMO except that it is infinite μ-a.e. on Rd. A sufficient condition and a necessary condition such that the maximal singular integral is bounded from L2 to itself are also obtained. There is a small gap between the two conditions.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…